Shark Electric Skateboard
SHARK WHEEL
Operation Manual - Shark Electric Skateboards
Shark Electric Skateboard
Please read this Manual before using the skateboard.
Website: WWW.SharkWheel.com
Safety Warning
This Manual is designed for Shark Electric products only.
We provide important safety warnings and precautions in this Manual. Please keep them in mind, to ensure safety and be
sure to read this Manual before use.
1. Skateboard has potential risks like other sports, and it might cause injury. When riding the skateboard, the user might
tumble due to loss of balance and get injured or even die.
2. Be sure to wear protective gear before use such as: helmet, kneepads, elbow pads, and hand guards.
3. When you use the electric skateboard for the first time, ride it on a safe open ground and practice basic movements such
as standing on the board, accelerating, braking and riding on slow mode to avoid getting injured in a collision.
4. Ride the electric skateboard on flat roads with grip in the open space. Do not ride it on
potholes/sand/gravel/muddy/uneven or slanted roads. Do not ride on slippery roads, such as snowy/icy and wet roads to
prevent wobbling in use. It is also very dangerous to ride the skateboard on a slope, particularly when riding downhill.
Always ride the skateboard within your ability.
5. Do not touch the motors with bare hands immediately after riding the skateboard; otherwise, you may get burnt and/ or
have other collateral damage.
6. Do not ride the skateboard at night or in a low visible environment.
7. Beginner-level skateboarders should not try to do fancy skateboarding tricks on the electric skateboard, such as an ollie,
emergency brake, or carving to avoid getting injured or damaging the skateboard.
8. Minors should be accompanied by parents when riding the electric skateboard and should not use a mobile phone or wear
Shark Electric Skateboard
headphones when riding.
9. Please check your shoelaces before riding the skateboard and avoid contact between your shoelaces and the wheel driving
system to avoid danger.
10. This electric skateboard has the function of power regeneration. Due to the power regeneration, the skateboard battery
will be overcharged when riding downhill and using the brake when the battery is full. This will affect the battery life. If
the voltage is higher than the safe value, the remote control will vibrate to remind the user, then the user needs to stop riding
downhill and find a flat ground or ride uphill to use the battery and it will be safe to ride downhill again afterwards.
11. Pay attention to the standing posture of your feet when riding and do not step on the front and rear wheel of the
skateboard to avoid danger when riding.
Disclaimer
1. When the motor is moving, do not touch it with any part of your body to avoid getting abrasions and other accidental
injuries.
2. Do not dismantle the equipment without permission; otherwise, if the skateboard is damaged due to inappropriate
dismantling, it will not be covered within the scope of warranty.
3. The waterproofing grade of the motor and remote control is IP54 (splash-proof). It is advised not to ride it on rainy days
or in puddles; if the skateboard is immersed in water and damaged, it will not be covered within the scope of warranty.
4. Please abide by local traffic laws when riding the electric skateboard; ride it on the allowed roads and grounds and do
not ride it side-by-side with other motor vehicles to avoid danger.
5. Minors should wear protective gear and be accompanied by parents or adults when riding and beginners should wear
safety gear and ride with caution.
6. Children under the age of 12, disabled people, pregnant women, people over the age of 50, mentally disabled people, and
people with a disability to move normally may not use the electric skateboard.
Shark Electric Skateboard
7. Improper operation may lead to failure of normal use of the skateboard and even damage related equipment. Therefore,
it is strongly advised to read this Manual carefully before using the skateboard and follow the specified operating procedures
strictly. We will bear no liability arising from use of this product, including without limiting the liability of compensation
for incidental losses or indirect losses; meanwhile, we will bear no liability arising from unauthorized modification of the
product. We may change the product design, appearance, performance, outer package and operating requirements without
prior notice.
8. Skateboarding is an inherently dangerous sport and safety equipment should be used at all times, especially a helmet.
Low speed accidents can still cause serious injury and/or death.
Don't be too cool for safety equipment and risk your life. Even the pros use a helmet and pads. Always watch out for cars
while riding on surface roads open to traffic and follow all pedestrian rules. Always skate within your abilities and use
common sense while riding. Check your equipment to make sure everything is in proper working condition prior to skating.
Shark Wheel accepts no liability should you injure yourself using any products sold under our brand name or sub-brand
names.
Shark Electric Skateboard
Contents
1. Introduction to the Skateboard…………………………………………………………………………………………………...5
Briefly introduce the composition of each part on the electric skateboard.
2. Product display………………………………………………………………………………………………………………...5-7
3. Remote control………………………………………………………………………………………………………………8-13
Use of the remote control to understand the user interface, specific operations and the use of pairing mode and data mode.
4. Remote control technical parameters…………………………………………………………………………………………...14
5. Technical Parameters of the Skateboard (Subject to the Purchased Product) ……………………………………………..15-20
6. Packaging List…………………………………………………………………………………………………………………21
7. Quick Start Guide…………………………………………………………………………………………………………...22-24
8. Instructions for Safe Use of Battery………………………………………………………………………………………..24-26
9. Skills for Riding the Skateboard…………………………………………………………………………………………….27-28
9. Precautions for Safe Use of the Skateboard…………………………………………………………………………………29-31
Learn safe use of the skateboard and troubleshooting.
10. Product Warranty…………………………………………………………………………………………………………..31-33
Know the after-sales warranty regulations of product.
9. Warranty Card………………………………………………………………………………………………………………….34
Shark Electric Skateboard
6
Shark Electric Skateboard
7
Shark Electric THIN
Shark Electric POWER
Shark Electric Skateboard
8
1.Remote control (Use of the remote control to understand the user interface, specific
operations, and the use of pairing mode and data mode.)
Shark Electric Skateboard
9
( L, M, H, H+ ) stands for low speed, medium speed, high speed and racing mode respectively.
(B1, B2, B3, B4) represent different braking strength, the bigger the number, the stronger the braking force.
1. Real-time speed display, remote control and skateboard power display, remote control signal display, ODO
Shark Electric Skateboard
10
skateboard cumulative mileage display and real-time mileage display.
2. Fixed-speed cruising mode: push rocker to a certain speed and press rocker down twice continuously (the cruising
mode can be entered after the speed is up to 10 kilometers), thereby entering into the fixed-speed cruising mode; then
release the throttle, the skateboard will maintain the current speed; the cruising mode can be exited by pressing any
button; save time and energy, free your hands and make the riding experience more enjoyable. to use the brake, pull
the throttle all the way to the end, now you can easily go downhill from a steep slope.
3. Remote control power switch;
4. High and low speed switch button; touch the L/H button lightly, the high and low speed will be displayed on the
display screen( L, M, H, H+ ) stands for low speed, medium speed, high speed and racing mode respectively.
5. Flashlight function; press the button when the remote control is turned on, then the remote control can be used as a
flashlight.
6. Forward/backward switch button; (F) means forward, (B) means backward.
7. Brake force adjustment②+⑦: remote control throttle pulls back to brake position, while touching the LED button to
adjust braking strength (B1, B2, B3, B4) represent different braking strength, the bigger the number, the stronger the
braking force.
8. Remote control charging port. (using Micro USB cable, mobile adapter can be charged)
Instruction for remote control code
Under normal circumstances, the code program of each board and the supporting remote control has completed when the
product leaves the factory, so consumers do not need to code again. However, when you accidentally lose the remote
control or buy a new remote control or the remote control is damaged and repaired, the code must be completed before
use.