CONTENTS
PRODUCT CATALOGUE - PROFESSIONAL PORTABLE POWER DISTRIBUTION SOLUTIONS
20
24
TABLE OF CONTENTS
PLASTIC POWER DISTRIBUTION UNITS.......................................................................................................................................5
RACK MOUNTED POWER DISTRIBUTION UNITS......................................................................................................................22
MODULAR POWER DISTRIBUTION UNITS.................................................................................................................................34
SOLID RUBBER POWER DISTRIBUTION UNITS.........................................................................................................................40
CABLE REELS...............................................................................................................................................................................63
CABLE ASSEMBLY.......................................................................................................................................................................70
DANIEL KORPONAI
Managing Director
PETER KORPONAI
Managing Director
“We used to provide high voltage entertainment services with a Tesla coil for the event and film industry.
Electricity was always an issue and our highest concern as vendors typically did not use professional
equipment with adequate protections. We learned from first-hand experience that electricity is the heart
of any movie set or event. Without adequately distributed electricity, the show can’t go on.
We believe electricity, thus fully protecting the crew and equipment, should be the top priority for any
film set or event. We launched Tesla Tech to provide professional electricity distribution solutions with
must-have functionalities. Tesla Tech enables end-users to stop worrying about electricity.”
CONTENTS
POWER DISTRIBUTION UNITS
Design and build services for units made of
plastic, solid rubber, and aluminium.
CABLE ASSEMBLY
Manufacturing input, extension, signal, control,
earthing and bonding cables.
CABLE REELS
Design and build services for cable drums with
a wide range of connectors, protections, and
measuring units.
ENGINEERING ADVISORY
Providing complex solutions for unique
electrical challenges.
Tesla Tech offers customisable, professional, and reliable solutions for portable power distribution. We have redefined industry standards to enable filming without any electrical interruption
and to fully protect the crew and equipment even in the case of extreme conditions. We design & build power distribution units, cable drums, and cable assembly.
OFFERING A ONE-STOP-SHOP SOLUTIONS FOR THE MOTION PICTURE AND THE EVENT INDUSTRY WHEN IT COMES TO ELECTRICITY
ABOUT TESLA TECH | ELECTRICAL SOLUTIONS FOR THE MOTION PICTURE AND THE EVENT INDUSTRY
CONTENTS
ABOUT TESLA TECH | PRODUCT PHILOSOPHY
RELIABILITY
Trusted safety features to fully
protect the crew and equipment.
CERTIFICATION
Our products fully comply with
local regulations and harmonized
EU standards.
QUALITY
Built with premium electrical products
manufactured by market-leading brands.
DIAGNOSTICS
The built-in measuring devices provide
real-time data to monitor the security of
the electricity supply.
COMPACT DESIGN
Professional product appearance
and user-friendly design.
MECHANICAL RESISTANCE
Designed for heavy-duty work
with impact resistant features.
EXCEPTIONAL FUNCTIONALITIES WITH NO COMPROMISE ON QUALITY. THIS IS WHAT TESLA TECH OFFERS.
CONTENTS
PLASTIC POWER
DISTRIBUTION UNITS
CONTENTS
TECHNICAL SPECIFICATIONS
[ ID: TTP1-P001-C ]
INPUT
PROTECTION
CEE 63A 400V 5P (Mennekes)
1x MCB C63A 4P (Schneider Electric Acti 9 series)
OUTPUT
PROTECTION
6x CEE 16A 3P (Mennekes)
3x RCCB 40A 30mA 2P A type, 6x MCB C16A 1P (Schneider Electric Acti 9 series)
3x CEE 32A 3P (Mennekes)
3x RCBO C32A 30mA A type 2P (Schneider Electric Acti 9 series)
1x CEE 32A 5P (Mennekes)
1x RCBO C32A 30mA A type 4P (Schneider Electric Acti 9 series)
1x CEE 63A 5P (Mennekes)
Looped
1x M8 earth stud (Schützinger)
1x Han® GND grounding connector (Harting)
ADDITIONAL FUNCTIONS
MEASURING DEVICE
1x power monitoring device with 3x current transformer (Siemens)
SAFETY
1x emergency stop pushbutton (Schneider Electric)
1x residual current monitor A type with current transformer (RCM)¹ (Siemens)
1x voltage monitoring relay (VMR)¹ (Schneider Electric)
2x key switch to bypass RCM and VMR
¹Operation with shunt trip release
INDICATOR LIGHT
3x phase indicator green LED (APEM)
2x fault indicator red LED for RCM and VMR (APEM)
DIMENSIONS - 475mm x 520mm x 455mm (H x W x D)
MATERIAL - HDPE – UV resistant | Protection type - IP54 and IK10
CERTIFICATION -
(EN 61439-1 and EN 61439-4)
PLASTIC POWER DISTRIBUTION UNITS | TTP1
CONTENTS
EMERGENCY
BUTTON
POWER
MONITORING DEVICE
PHASES WITH
DISTINCTIVE
MARKINGS
HEAVY-DUTY
HANDLE
RESIDUAL CURRENT
CIRCUIT BREAKERS (RCCB)
AND MINIATURE CIRCUIT
BREAKERS (MCB)
QCR* FASTENING
TECHNOLOGY
DUAL EARTHING SYSTEM
STACKABLE AND WEAR-RESISTANT
STAINLESS STEEL FEET
UV AND WATER-RESISTANT
BLACK HDPE MATERIAL WITH
A STRUCTURED SURFACE
*QCR fastening technology stands for Quick Connector Replacements meaning that the user can change the connector by solely removing the 4 screws without
fully disassembling the distribution unit. We designed and built the PDU with sufficient wires to let the user smoothly change the connector.
HIDDEN CAP HOLDER
PHASE
INDICATOR LED
FAULT INDICATOR LED
SHUNT TRIP RELEASE
“MAIN” MINIATURE
CIRCUIT BREAKER (MCB)
RESIDUAL CURRENT MONITOR
WITH BYPASS KEY SWITCH
VOLTAGE MONITORING RELAY
WITH BYPASS KEY SWITCH
RESIDUAL CURRENT CIRCUIT
BREAKERS WITH OVERCURRENT
PROTECTION (RCBO)
PLASTIC POWER DISTRIBUTION UNITS | TTP1
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP1 ORDERING GUIDE (1/2)
ID (Prefix)
Input
Input protection
Output
Output protection
Colour of connectors*
TTP1-P001
CEE 63A 400V 5P (ME)
1x MCB C63A 4P (SE)
6x CEE 16A 3P (ME)
3x CEE 32A 3P (ME)
1x CEE 32A 5P (ME)
1x CEE 63A 5P (ME)
1x M8 earth stud (HA)
1x Han® GND con. (HA)
3x RCCB 40A 30mA 2P A type, 6x MCB C16A 1P (SE)
3x RCBO C32A 30mA A type 2P (SE)
1x RCBO C32A 30mA A type 4P (SE)
Looped
C or B code
TTP1-P002
CEE 63A 400V 5P (ME)
1x MCB C63A 4P (SE)
6x Schuko® 16A 3P (ME)
3x CEE 32A 3P (ME)
1x CEE 32A 5P (ME)
1x CEE 63A 5P (ME)
1x M8 earth stud (HA)
1x Han® GND con. (HA)
3x RCCB 40A 30mA 2P A type, 6x MCB C16A 1P (SE)
3x RCBO C32A 30mA A type 2P (SE)
1x RCBO C32A 30mA A type 4P (SE)
Looped
C or B code
Example Plastic Distribution Unit Ordering Number:
TTP1-P001
1. ID (Prefix)
2. Colour of connectors*
Legend: AP=APEM | HA= Harting | ME=Mennekes | TI=Nexans Titanex | SE=Schneider Electric | SI=Siemens
TTP1 Professional Product Offerings
Notes
All units are manufactured with the following additional functions:
Measuring device
1x power monitoring device (SI)
Safety
1x emergency button with shunt trip release
1x residual current monitor (RCM)
1x voltage monitoring relay (VMR)
2x key switches to bypass RCM and VMR
Indicator light
3x phase indicator LED
2x fault indicator LED for RCM and VMR
*Colour of the connectors: code C refers to coloured connectors (CEE: red for
three-phase and blue for single-phase; Schuko: phases with different coloured
connectors (blue, black, grey)) while code B refers to black-coloured connectors.
Looking for a different unit? We provide design & build services
for custom units. Contact us with your specification.
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP1 ORDERING GUIDE (2/2)
ID (Prefix)
Input
Input protection
Output
Output protection
Colour of connectors*
TTP1-S001
CEE 63A 400V 5P (ME)
1x MCB C63A 4P (SE)
1x RCCB 63A 30mA 4P A type (SE)
9x CEE 16A 3P (ME)
3x CEE 32A 3P (ME)
1x CEE 32A 5P (ME)
1x CEE 63A 5P (ME)
1x Han® GND con. (HA)
9x MCB C16A 1P (SE)
3x MCB C32A 1P (SE)
1x MCB C32A 3P (SE)
Looped
C or B code
TTP1-S002
CEE 63A 400V 5P (ME)
1x MCB C63A 4P (SE)
1x RCCB 63A 30mA 4P A type (SE)
9x Schuko® 16A 3P (ME)
3x CEE 32A 3P (ME)
1x CEE 32A 5P (ME)
1x CEE 63A 5P (ME)
1x Han® GND con. (HA)
9x MCB C16A 1P (SE)
3x MCB C32A 1P (SE)
1x MCB C32A 3P (SE)
Looped
C or B code
Example Plastic Distribution Unit Ordering Number:
TTP1-S001
1. ID (Prefix)
2. Colour of connectors*
Notes
All units are manufactured with the following additional functions:
Measuring device
1x power monitoring device (SI)
Safety
1x emergency button with shunt trip release
Indicator light
3x phase indicator LED
*Colour of the connectors: code C refers to coloured connectors (CEE: red for
three-phase and blue for single-phase; Schuko: phases with different coloured
connectors (blue, black, grey)) while code B refers to black-coloured connectors.
Looking for a different unit? We provide design & build services
for custom units. Contact us with your specification.
Legend: AP=APEM | HA= Harting | ME=Mennekes | TI=Nexans Titanex | SE=Schneider Electric | SI=Siemens
TTP1 Standard Product Offerings
CONTENTS
TECHNICAL SPECIFICATIONS
[ ID: TTP2-001-C]
INPUT
PROTECTION
1x CEE 32A 400V 5P (Mennekes)
1x RCCB 40A 30mA 4P A type (Schneider Electric Acti 9 series)
OUTPUT
PROTECTION
6x Schuko® 16A 230V 3P (Mennekes)
6x MCB C16A 1P (Schneider Electric Acti 9 series)
3x CEE 32A 230V 3P (Mennekes)
3x MCB C32A 1P (Schneider Electric Acti 9 series)
1x CEE 32A 400V 5P (Mennekes)
1x MCB C32A 3P (Schneider Electric Acti 9 series)
1x Han® GND grounding connector (Harting)
ADDITIONAL FUNCTIONS
INDICATOR LIGHT
3x phase indicator LED (APEM)
DIMENSIONS - 325mm x 525mm x 450mm (H x W x D)
MATERIAL - UV and water-resistant black HDPE with structured surface
PROTECTION TYPE - IP54 and IK10
CERTIFICATION -
(EN 61439-1 and EN 61439-4)
PLASTIC POWER DISTRIBUTION UNITS | TTP2
10
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP2 ORDERING GUIDE
ID (Prefix)
Input
Input protection
Output
Output protection
Colour of connectors*
TTP2-001
CEE 32A 400V 5P (ME)
1x RCCB 40A 30mA 4P A type (SE)
6x Schuko® 16A 3P (ME)
3x CEE 32A 3P (ME)
1x CEE 32A 5P (ME)
1x Han® GND con. (HA)
6x MCB C16A 1P (SE)
3x MCB C32A 1P (SE)
1x MCB C32A 3P (SE)
C or B code
TTP2-002
CEE 32A 400V 5P (ME)
1x RCCB 40A 30mA 4P A type (SE)
6x CEE 16A 3P (ME)
3x CEE 32A 3P (ME)
1x CEE 32A 5P (ME)
1x Han® GND con. (HA)
6x MCB C16A 1P (SE)
3x MCB C32A 1P (SE)
1x MCB C32A 3P (SE)
C or B code
TTP2-003
CEE 32A 400V 5P (ME)
1x RCCB 40A 30mA 4P A type (SE)
6x Schuko® 16A 3P (ME)
2x CEE 16A 5P (ME)
1x CEE 32A 5P (ME)
1x Han® GND con. (HA)
6x MCB C16A 1P (SE)
2x MCB C16A 3P (SE)
1x MCB C32A 3P (SE)
C or B code
TTP2-004
CEE 32A 400V 5P (ME)
1x RCCB 40A 30mA 4P A type (SE)
6x CEE 16A 3P (ME)
2x CEE 16A 5P (ME)
1x CEE 32A 5P (ME)
1x Han® GND con. (HA)
6x MCB C16A 1P (SE)
2x MCB C16A 3P (SE)
1x MCB C32A 3P (SE)
C or B code
TTP2-005
CEE 32A 400V 5P (ME)
1x RCCB 40A 30mA 4P A type (SE)
12x Schuko® 16A 3P (ME)
1x Han® GND con. (HA)
12x MCB C16A 1P (SE)
C or B code
TTP2-006
CEE 32A 400V 5P (ME)
1x RCCB 40A 30mA 4P A type (SE)
12x CEE 16A 3P (ME)
1x Han® GND con. (HA)
12x MCB C16A 1P (SE)
C or B code
TTP2-007
CEE 32A 400V 5P (ME)
1x RCCB 40A 30mA 4P A type (SE)
12x powerCON® TRUE1® TOP 16A 3P (NE)
1x Han® GND con. (HA)
12x MCB C16A 1P (SE)
C or B code
Example Plastic Distribution Unit Ordering Number:
TTP2-001
1. ID (Prefix)
2. Colour of connectors*
Notes
All units are manufactured with the following additional function:
Indicator light
3x phase indicator green LED
*Colour of the connectors: code C refers to coloured connectors (CEE: red for
three-phase and blue for single-phase; Schuko: phases with different coloured
connectors (blue, black, grey)) while code B refers to black-coloured connectors.
Looking for a different unit? We provide design & build services
for custom units. Contact us with your specification.
Legend: AP=APEM | HA= Harting | ME=Mennekes | TI=Nexans Titanex | SE=Schneider Electric | SI=Siemens
11
CONTENTS
TECHNICAL SPECIFICATIONS
[ ID: TTP3-001-C ]
INPUT
PROTECTION
1x CEE 63A 400V 5P (Mennekes)
OUTPUT
PROTECTION
3x CEE 63A 230V 3P (Mennekes)
3x RCCB 63A 30mA 2P A type and 3x MCB C63A 1P
(Schneider Electric Acti 9 series)
1x Han® GND grounding connector (Harting)
ADDITIONAL FUNCTIONS
INDICATOR LIGHT
3x phase indicator LED (APEM)
DIMENSIONS - 325mm x 525mm x 450mm (H x W x D)
MATERIAL - UV and water-resistant black HDPE with structured surface
PROTECTION TYPE - IP54 and IK10
CERTIFICATION -
(EN 61439-1 and EN 61439-4)
PLASTIC POWER DISTRIBUTION UNITS | TTP3
12
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP3 ORDERING GUIDE
ID (Prefix)
Input
Input protection
Output
Output protection
Colour of connectors*
TTP3-001
CEE 63A 400V 5P (ME)
3x CEE 63A 3P (ME)
1x Han® GND con. (HA)
3x RCCB 63A 30mA 2P A type, 3x MCB C63A 1P (SE)
C or B code
TTP3-002
CEE 63A 400V 5P (ME)
1x RCCB 63A 30mA 4P A type (SE)
3x CEE 16A 3P (ME)
3x CEE 32A 3P (ME)
3x CEE 32A 5P (ME)
3x MCB C16A 1P (SE)
3x MCB C32A 1P (SE)
3x MCB C32A 3P (SE)
C or B code
TTP3-003
CEE 63A 400V 5P (ME)
1x RCCB 63A 30mA 4P A type (SE)
6x Schuko® 16A 3P (ME)
1x CEE 16A 5P (ME)
2x CEE 32A 5P (ME)
6x MCB C16A 1P (SE)
1x MCB C16A 3P (SE)
2x MCB C32A 3P (SE)
C or B code
TTP3-004
CEE 63A 400V 3P (ME)
1x RCCB 63A 30mA 2P A type (SE)
6x CEE 16A 3P (ME)
3x CEE 32A 3P (ME)
1x Han® GND con. (HA)
6x MCB C16A 1P (SE)
3x MCB C32A 1P (SE)
C or B code
Example Plastic Distribution Unit Ordering Number:
TTP3-001
1. ID (Prefix)
2. Colour of connectors*
Legend: AP=APEM | HA= Harting | ME=Mennekes | TI=Nexans Titanex | SE=Schneider Electric | SI=Siemens
13
Notes
All units are manufactured with the following additional function:
Indicator light
3x phase indicator green LED
*Colour of the connectors: code C refers to coloured connectors (CEE: red for
three-phase and blue for single-phase; Schuko: phases with different coloured
connectors (blue, black, grey)) while code B refers to black-coloured connectors.
Looking for a different unit? We provide design & build services
for custom units. Contact us with your specification.
CONTENTS
TECHNICAL SPECIFICATIONS
[ ID: TTP4-001-F-C]
INPUT
PROTECTION
1x CEE 32A 400V 5P (Mennekes)
1x Main MCB C32A 4P (Schneider Electric Acti 9 series)
OUTPUT
PROTECTION
3x Syntax® SSX 16A 230V 19P
3x RCCB 40A 30mA 4P A type and 18x MCB C16A 1P
with IP67 protective cap (Valentini)
(Schneider Electric Acti 9 series)
3x Schuko® 16A 230V 3P (Mennekes)
1x RCCB 25A 30mA 4P A type and 3x MCB C16A 1P
(Schneider Electric Acti 9 series)
1x Han® GND grounding connector (Harting)
ADDITIONAL FUNCTIONS
INDICATOR LIGHT
3x phase indicator LED (APEM)
18x phase indicator light green LED for Syntax® SSX connectors (Comelux)
ILLUMINATION
1x rear working light with switch
DIMENSIONS - 325mm x 525mm x 450mm (H x W x D)
MATERIAL - UV and water-resistant black HDPE with structured surface
PROTECTION TYPE - IP54 and IK10
CERTIFICATION -
(EN 61439-1 and EN 61439-4)
PLASTIC POWER DISTRIBUTION UNITS | TTP4
14
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP4 ORDERING GUIDE
ID (Prefix)
Input
Input protection
Output
Output protection
Type of connectors*
Colour of connectors**
TTP4-001
CEE 32A 400V 5P (ME)
1x MCB C32A 4P (SE)
3x Socapex 16A 19P (VA)
3x Schuko® 16A 3P (ME)*
1x Han® GND con. (HA)
3x RCCB 40A 30mA 4P A type, 18x MCB C16A 1P (SE)
1x RCCB 25A 30mA 4P A type, 3x MCB C16A 1P (SE)
F, E, G, H, or P code
C or B code
Example Plastic Distribution Unit Ordering Number:
TTP4-001
1. ID (Prefix)
2. Type of connectors*
3. Colour of connectors**
Legend: AP=APEM | HA= Harting | ME=Mennekes | TI=Nexans Titanex | SE=Schneider Electric | SI=Siemens | VA=Valentini
15
Notes
All units are manufactured with the following additional function:
Indicator light
3x phase indicator green LED
18x phase indicator light green LED for Syntax® SSX connectors
Illumination
1x rear working light with switch
**Colour of the connectors: code C refers to coloured connectors (CEE: red for
three-phase and blue for single-phase; Schuko: phases with different coloured
connectors (blue, black, grey)) while code B refers to black-coloured connectors.
Looking for a different unit? We provide design & build services
for custom units. Contact us with your specification.
*CUSTOMIZABLE CONNECTORS: German Schuko® Type
French / Belgian Type
British Type
Israel Type
powerCON® TRUE1® TOP Type
CONTENTS
TECHNICAL SPECIFICATIONS
[ ID: TTP5-001-F-C ]
INPUT
PROTECTION
1x CEE 63A 400V 5P (Mennekes)
1x MCCB 63A 4P 25kA with extended rotary handle
(Schneider Electric NSXm 63B series)
OUTPUT
PROTECTION
6x Syntax® SSX 16A 230V 19P with IP67
6x RCCB 40A 30mA 4P A type and 36x MCB C16A 1P
protective cap (Valentini)
(Schneider Electric Acti 9 series)
1x CEE 32A 400V 5P (Mennekes)
1x RCCB 40A 30mA 4P A type and 1x MCB C32A 3P
(Schneider Electric Acti 9 series)
3x Schuko® 16A 230V 3P (Mennekes)
1x RCCB 25A 30mA 4P A type and 3x MCB C16A 1P
(Schneider Electric Acti 9 series)
ADDITIONAL FUNCTIONS
MEASURING DEVICE
1x power monitoring device with 3x current transformer (Siemens)
SAFETY
1x emergency stop pushbutton (Schneider Electric)
1x residual current monitor A type with current transformer (RCM)¹ (Siemens)
1x voltage monitoring relay (VMR)¹ (Schneider Electric)
2x key switch to bypass RCM and VMR
¹Operation with shunt trip release
INDICATOR LIGHT
ILLUMINATION
6x phase indicator white LED (APEM)
1x front working light with switch
3x MCCB „I-ON” state phase indicator green LED (APEM)
1x rear working light with switch
1x MCCB „TRIP” state indicator red LED (APEM)
36x phase indicator green LED for Syntax® SSX connectors (Comelux)
2x fault indicator red LED for RCM and VMR (APEM)
DIMENSIONS - 620mm x 550mm x 550mm (H x W x D)
MATERIAL - UV and water-resistant black HDPE with structured surface built in flightcase
PROTECTION TYPE - IP54 and IK10
CERTIFICATION -
(EN 61439-1 and EN 61439-4)
PLASTIC POWER DISTRIBUTION UNITS | TTP5
16
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP5 ORDERING GUIDE
ID (Prefix)
Input
Input protection
Output
Output protection
Type of connectors*
Colour of connectors**
TTP5-001
CEE 63A 400V 5P (ME)
1x MCCB 63A 4P (SE)
1x CEE 32A 5P (ME)
6x Socapex 16A 19P (VA)
3x Schuko® 16A 3P (ME)*
1x Han® GND con. (HA)
1x RCCB 40A 30mA 4P A type, 1x MCB C32A 3P (SE)
6x RCCB 40A 30mA 4P A type, 36x MCB C16A 1P (SE)
1x RCCB 25A 30mA 4P A type, 3x MCB C16A 1P (SE)
F, E, G, H, or P code
C or B code
Example Plastic Distribution Unit Ordering Number:
TTP5-001
1. ID (Prefix)
2. Type of connectors*
3. Colour of connectors**
Legend: AP=APEM | HA= Harting | ME=Mennekes | TI=Nexans Titanex | SE=Schneider Electric | SI=Siemens | VA=Valentini
17
Notes
All units are manufactured with the following additional functions:
Measuring device
1x power monitoring device (SI)
Safety
1x emergency button with shunt trip release
1x residual current monitor (RCM)
1x voltage monitoring relay (VMR)
2x key switch to bypass RCM and VMR
Indicator light
6x phase indicator white LED
3x MCCB „I-ON” state phase indicator green LED
1x MCCB „TRIP” state indicator red LED
36x phase indicator green LED for Syntax® SSX connectors
2x fault indicator red LED for RCM and VMR
Illumination
1x front working light with switch
1x rear working light with switch
**Colour of the connectors: code C refers to coloured connectors (CEE: red for
three-phase and blue for single-phase; Schuko: phases with different coloured
connectors (blue, black, grey)) while code B refers to black-coloured connectors.
Looking for a different unit? We provide design & build services
for custom units. Contact us with your specification.
*CUSTOMIZABLE CONNECTORS: German Schuko® Type
French / Belgian Type
British Type
Israel Type
powerCON® TRUE1® TOP Type
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP6
18
TECHNICAL SPECIFICATIONS
[ ID: TTP6-001-C ]
INPUT
PROTECTION
1x CEE 63A 400V 5P (Mennekes)
1x MCCB 63A 4P 25kA with extended rotary handle
(Schneider Electric NSXm 63B series)
OUTPUT
PROTECTION
8x powerCON® TRUE1® TOP 16A 230V 3P (Neutrik)
8x RCBO C16A 30mA 1P A type (Siemens)
4x Schuko® 16A 230V 3P (Mennekes)
Parallel with powerCON® TRUE1® TOP
4x Han® 16E 16A 230V 16P with IP65 protective cap (Harting)
24x RCBO C16A 30mA 1P A type (Siemens)
1x CEE 63A 400V 5P (Mennekes)
Looped
M8 earth stud (Schützinger)
ADDITIONAL FUNCTIONS
MEASURING DEVICE
1x power monitoring device with 3x current transformer (Siemens)
SAFETY
1x emergency stop pushbutton (Schneider Electric)
1x residual current monitor A type with current transformer (RCM)¹ (Siemens)
1x voltage monitoring relay (VMR)¹ (Schneider Electric)
2x key switch to bypass RCM and VMR
¹Operation with shunt trip release
INDICATOR LIGHT
ILLUMINATION
6x phase indicator white LED (APEM)
1x front working light with switch
3x MCCB „I-ON” state phase indicator green LED (APEM)
1x rear working light with switch
1x MCCB „TRIP” state indicator red LED (APEM)
8x „I-ON” state phase indicator green LED for powerCON® TRUE1® TOP connectors (Comelux)
4x „I-ON” state phase indicator green LED for Schuko® connectors (Comelux)
24x „I-ON” state phase indicator green LED for Han® 16E connectors (Comelux)
1x „I-ON” state phase indicator green LED for CEE 63A 5P link output connector (APEM)
2x fault indicator red LED for RCM and VMR (APEM)
DIMENSIONS - 555mm x 525mm x 455mm (H x W x D)
MATERIAL - UV and water-resistant black HDPE with structured surface and wheels
PROTECTION TYPE - IP54 and IK10
CERTIFICATION -
(EN 61439-1 AND EN 61439-4)
CONTENTS
PLASTIC POWER DISTRIBUTION UNITS | TTP7
19
TECHNICAL SPECIFICATIONS
[ ID: TTP7-001-C ]
INPUT
PROTECTION
1x CEE 125A 400V 5P (Mennekes)
1x MCCB 125A 4P 25kA with extended rotary handle
(Schneider Electric NSXm 125B series)
OUTPUT
PROTECTION
6x powerCON® TRUE1® TOP 16A 230V 3P (Neutrik)
6x RCBO C16A 30mA 1P A type (Siemens)
6x Schuko® 16A 230V 3P (Mennekes)
Parallel with powerCON® TRUE1® TOP
4x CEE 16A 400V 5P (Mennekes)
4x RCCB 25A 30mA 4P A type and 4x MCB C16A 3P (Schneider Electric Acti 9 series)
4x CEE 32A 400V 5P (Mennekes)
4x RCCB 40A 30mA 4P A type and 4x MCB C32A 3P (Schneider Electric Acti 9 series)
3x CEE 63A 400V 5P (Mennekes)
3x MCB C63A 4P (Schneider Electric Acti 9 series)
1x CEE 125A 400V 5P (Mennekes)
Looped
M12 earth stud (Schützinger)
ADDITIONAL FUNCTIONS
MEASURING DEVICE
1x power monitoring device with 3x current transformer (Siemens)
SAFETY
1x emergency stop pushbutton (Schneider Electric)
1x LCD residual current monitor A type with current transformer (RCM)¹ (Siemens)
1x voltage monitoring relay (VMR)¹ (Schneider Electric)
2x key switch to bypass RCM and VMR
¹Operation with shunt trip release
INDICATOR LIGHT
ILLUMINATION
6x phase indicator white LED (APEM)
1x front working light with switch
3x MCCB „I-ON” state phase indicator green LED (APEM)
1x rear working light with switch
1x MCCB „TRIP” state indicator red LED (APEM)
6x „I-ON” state phase indicator green LED for powerCON® TRUE1® TOP connectors (Comelux)
6x „I-ON” state phase indicator green LED for Schuko® connectors (Comelux)
4x „I-ON” state phase indicator green LED for CEE 16A 5P connectors (APEM)
4x „I-ON” state phase indicator green LED for CEE 32A 5P connectors (APEM)
3x „I-ON” state phase indicator green LED for CEE 63A 5P connectors (APEM)
1x „I-ON” state phase indicator green LED for CEE 125A 5P link output connector (APEM)
2x fault indicator red LED for RCM and VMR (APEM)
DIMENSIONS - 835mm x 525mm x 505mm (H x W x D)
MATERIAL - UV and water-resistant black HDPE with structured surface and wheels
PROTECTION TYPE - IP54 and IK10
CERTIFICATION -
(EN 61439-1 AND EN 61439-4)
PLASTIC POWER DISTRIBUTION UNITS | TTP400
20
TECHNICAL SPECIFICATIONS
[ ID: TTP400-001-C ]
INPUT
PROTECTION
5x Powerlock 400A 1P drain connector with
1x MCCB 400A 4P 36kA with extended rotary handle
IP67 protective cap (VALENTINI)
(Schneider Electric NSX400F series)
OUTPUT
PROTECTION
2x CEE 125A 400V 5P (Mennekes)
2x MCB C125A 4P (Schneider Electric ACTI9 C120N series)
4x CEE 63A 400V 5P (Mennekes)
4x MCB C63A 4P (Schneider Electric Acti 9 series)
3x CEE 32A 400V 5P (Mennekes)
3x RCCB 40A 30mA 4P A type and 3x MCB C32A 3P (Schneider Electric Acti 9 series)
1x CEE 16A 400V 5P (Mennekes)
1x RCCB 25A 30mA 4P A type and 1x MCB C16A 3P (Schneider Electric Acti 9 series)
12x powerCON® TRUE1® TOP 16A 230V 3P (Neutrik)
2x RCCB 40A 30mA 4P A type and 12x MCB C16A 3P (Schneider Electric Acti 9 series)
3x Schuko® 16A 230V 3P (Mennekes)
1x RCCB 25A 30mA 4P A type and 3x MCB C16A 3P (Schneider Electric Acti 9 series)
M12 earth stud (Schützinger)
3x Han® GND grounding connector (Harting)
ADDITIONAL FUNCTIONS
MEASURING DEVICE
1x power monitoring device with 3x current transformer (Siemens)
SAFETY
1x emergency stop pushbutton (Schneider Electric)
1x LCD residual current monitor A type with current transformer (RCM)¹ (Siemens)
1x voltage monitoring relay (VMR)¹ (Schneider Electric)
2x key switch to bypass RCM and VMR
¹Operation with shunt trip release
INDICATOR LIGHT
ILLUMINATION
6x phase indicator white LED (APEM)
1x front working light with switch
3x MCCB „I-ON” state phase indicator green LED (APEM)
1x rear working light with switch
1x MCCB „TRIP” state indicator red LED (APEM)
2x fault indicator red LED for RCM and VMR (APEM)
DIMENSIONS - 975mm x 725mm x 575mm (H x W x D)
MATERIAL - UV and water-resistant black HDPE with structured surface and wheels
PROTECTION TYPE - IP54 and IK10
CERTIFICATION -
(EN 61439-1 AND EN 61439-4)
CONTENTS