PRODUCT
CATALOG
Liners and resins
Machines
and equipment
brawosystems-usa.com
Leader of Lining Solutions
855-997-0524 apexcipp.com
brawosystems-usa.com
2 | BRAWO® SYSTEMS PRODUCT CATALOG
Without digging and
chiselling work
Suitable for nearly all damage
profiles and pipe materials
Shorter down time
Rooms remain habitable during
rehabilitation
Environmentally friendly,
sustainable and permanent
Up to 50 % cheaper than open
construction method
brawosystems-usa.com
BRAWO® SYSTEMS Range of Products
BRAWOLINER® - A quality product!
2
BRAWO® SYSTEMS Range of Products
BRAWOLINER®
4
BRAWOLINER®
5
BRAWOLINER® 3D
5
BRAWOLINER® XT
5
BRAWOLINER® HT
5
BRAWO® Installation Aids
Airbagliner
6
4 Curing Methods
7
BRAWO® Resins
Resins for steam / hot water / ambient curing
BRAWO® I US
8
BRAWO® III US
8
BRAWO® SRR US
8
Table of Working and Curing Times
9
Light curing resin
BRAWO® UVPox US
9
BRAWO® Tech – Light Curing
BRAWO® Pico sx
10
BRAWO® Magnavity sx
12
BRAWO® Academy Tutorials
14
BRAWO® Downloads
15
brawosystems-usa.com
4 | BRAWO® SYSTEMS PRODUCT CATALOG
BRAWOLINER®
BRAWO® SYSTEMS offers a seamless textile liner for the rehabilitation of small diameter pipes.
The BRAWOLINER® is extremely flexible due to the special loop construction. This makes it the ideal rehabilitati-
on solution for defective pipes with bends of up to 90° and up to two changes in dimension. This liner offers an
economic and environmentally-friendly alternative to open construction work!
OVOID
PROFILES
Also suitable for special profiles
Up to two
dimensional
changes
Seamlessly
knitted and
extremely
flexible
One liner for all four
curing methods
The only
seamless
coated
liner on the
market:
The new
BRAWOLINER®
SQUARE PROFILES
brawosystems-usa.com
BRAWO® SYSTEMS PRODUCT CATALOG | 5
BRAWOLINER®
The standard for repairing defective drains
From 2“ to 10“ (DN 50 to DN 250)
Bends of up to 90°
One dimensional change
BRAWOLINER® 3D
Liner for changing diameters
From 3“ to 4“ (DN 70 to DN 100)
From 4“ to 6“ (DN 100 to DN 150)
From 6“ to 8“ (DN 150 to DN 225)
From 8“ to 12“ (DN 200 to DN 300)
From 12“ to 16“ (DN 300 to DN 400)
Bends of up to 90°
BRAWOLINER® XT
Rehabilitation of structurally impaired pipes
From 5“ to 10“ (DN 125 to DN 250)
Significantly higher stiffness
Bends of up to 90°
One dimensional change
BRAWOLINER® HT (XT, 3D)
For domestic sewer rehabilitation
From 2“ to 10“ (DN 50 to DN 250)
Bends of up to 90°
Up to two changes in dimension
Warm curing possible at higher temperatures
with water or steam
Bends up to 90°
6 | BRAWO® SYSTEMS PRODUCT CATALOG
BRAWO® Installation Aids
Airbagliner
To make steam curing even easier and faster,
BRAWO® SYSTEMS offers the AIRBAGLINER®.
From 2“ to 16“ (DN 50 to DN 400)
Very high flexibility and an extreme sliding capacity
Simplifies the inversion process even in pipes with
small diameters and changes of direction
Heat-resistant up to 150 °C, can be removed in less
than 60 minutes
The retraction process is made much easier by the
high sliding capacity
Pressure resistance of up to 2 bar
Particularly suitable for negotiating bends
Can be reused up to 6 times
Special loop
construction
– over 120 years
of textile expertise
BRAWOLINER® fulfills quality standards, e.g.:
Material examination of BRAWO® I US in accordance to ASTM F1216
Material examination of BRAWO® III US in accordance to ASTM F1216
Material examination of BRAWO® UV Pox US in accordance to ASTM F1216
BRAWOLINER® compliance tests according to DIN EN ISO 11296-4
All US partners are trained in the installation of BRAWOLINER®.
brawosystems-usa.com
BRAWO® SYSTEMS PRODUCT CATALOG | 7
Everything from
one source for all
curing methods.
Light Curing (LED and UV)
Steam Curing
Hot Water Curing
Ambient Curing
Light Curing with UV and LED-light
The fast and low-cost curing with light
For in-house rehabilitation as well as for house lateral pipes
and from manhole to manhole
Ideal for construction sites with a tight schedule
Steam Curing
Curing process by steam
For in-house rehabilitation as well as for house lateral pipes
and from manhole to manhole
Hot Water Curing
Curing process by hot water
Ideal for house lateral pipes
Ambient Curing (without additional heat)
Curing process by ambient temperature
Ideal for in-house rehabilitation and house lateral pipes
8 | BRAWO® SYSTEMS PRODUCT CATALOG
BRAWO® Resins
The resins of BRAWO® SYSTEMS are especially developed for the rehabilitation of sewer systems. The BRAWO® epoxy
resins will harden and cure at both ambient and higher temperatures. The application of heat considerably reduces the
curing time. For fast curing with light, the epoxy resin „BRAWO® UVPox US“ must be used.
These resins have been optimized for use with the BRAWOLINER® and have outstanding properties:
High abrasion resistance
Solvent-free
Excellent mechanical properties
High chemical resistance
Not harmful to groundwater
(Examined by the hygiene institute of the Ruhr area –
institute of environmental hygiene and toxicology,
Gelsenkirchen, GERMANY)
BRAWO® I US
This rapidly curing resin for underground pipes is
particularly suitable for the rehabilitation of shorter
pipes of up to approx. 50 ft
in length
Available container sizes:
22.05 lbs (10 kg)
66.14 lbs (30 kg)
BRAWO® III US
Thanks to the longer working time, the BRAWO® III US
is suitable for the rehabilitation of longer pipe sec-
tions or large pipe diameters
Available container sizes:
22.05 lbs (10 kg)
66.14 lbs (30 kg)
BRAWO® SRR US
For particularly economic rehabiliation of pipe
connections or short pipe sections
Available container size:
66.14 lbs (30 kg)
Resins for
steam / hot water / ambient curing
brawosystems-usa.com
BRAWO® SYSTEMS PRODUCT CATALOG | 9
BRAWO® UVPox US is the first pigmented light curing
epoxy resin optimized to work with the BRAWOLINER®.
Positive fit in the old pipe with no penetration or
infiltration of water behind
High installation reliability due to extremely long
processing time
Optical check using colored resin
Targeted, fast curing
Styrene-free and low-odour
Curing with our light curing systems (UV or LED-light)
Available container sizes:
26.46 lbs (12 kg)
2204.62 lbs (1000 kg)
BRAWO® UVPox US
For more efficient light curing in buildings
and on properties
Bulk options from
3 lbs to 2200 lbs
Working and curing times of BRAWO® epoxy resins
BRAWO® I US
BRAWO® III US
BRAWO® SRR US
Working time at 59 °F
50 min.
3.5 hr
30 min.
Curing time 50 °F
13 hr
24 hr
4 hr
Curing time 122 °F
100 min.
220 min.
30 min.
Curing time 158 °F
45 min.
140 min.
not recommended
Light curing resin
10 | BRAWO® SYSTEMS PRODUCT CATALOG
Light Curing
Curing with light
CE conform
+ NRTL
certified
NEW!
Nominal
widths
2“ – 4“